26. 參考資料
 26.6. 製作一個可以開機的裝置[20050928]

製作一個可以開機的裝置

  •   Floppy Disk
  •   CD-ROM
  •   USB-Stick
  •   System Analyser Files


1. FLOPPY DISK

建議使用WinMe, WinXP或Win98se 的DOS,放一片1.44 Floppy到drive A: 在Windows 98se內製作一片DOS開機片

方法1:

  • 打開檔案總管
  • 選取軟碟機
  • 按下滑鼠右鍵
  • 選取格式化
  • 選取格式碟片的選項:最重要的事要勾選拷貝系統檔案的選項
  • 真正只需要的檔案是: io.sys, msdos.sys 與 command.com
  • drvspace.bin 通常不是必要的

方法2:

  • 到控制台
  • 選取: 新增或移除程式
  • 選取: 開機片
  • 選取: 製作開機片
  • 真正只需要的檔案是: io.sys, msdos.sys 與command.com
  • 可以刪除不必要的其他檔案

方法3:

In DOS or a Dosbox:

Go to C:\

Execute: SYS A:

Or if you also want to format the floppy: FORMAT A:/S

Check if the command.com is also copied.

You can copy that from C:\windows\

(COPY  C:\windows\command.com  A:)

Sometimes you need himem.sys (to drive part of DOS high to reserve memory)

or emm386.exe (not recommended)

You can copy them from c:\windows\
 
Making a DOS boot disk in Windows ME

Go to the Control Panel

Select: Add/Remove programs

Select: Startup Disk

Select: Create Disk

You need at least the: io.sys, msdos.sys and command.com

You can delete the files you do not need.


Making a DOS boot disk in Windows XP

Open the explorer

Select the floppy drive

Push the right mouse button

Select FORMAT

Now select Create an MS-DOS startup disk

You need the: io.sys, msdos.sys and command.com

You can delete the other files
 
Making a DOS boot disk in Windows 2000

            Not possible

      CD-ROM

I cannot describe all the burn programs

In short this what you have to do:

Put a bootable 1.44 floppy with the files you need in drive A:

Put a CD-R(W) in the CD-writer (I use an 8cm CD-RW)

In the Burn program select: CD-ROM boot

Select: source of boot image: A:\

Burn the CD.

This the most simple way to make a bootable CD

         After booting your CD acts as an 1.44 floppy


      USB-STICK
 
Making an USB-stick bootable:

   To make an USB stick bootable you can use this utility:

      HP USB Disk Storage Format Tool

      You need a boot floppy made with FLOPPY DISK

                  (!!! This utility destroys all the info on the USB stick, Backup to files first !!!)

               If you want to do it yourself:

                  The stick has to have an ACTIVE primary partition.

                  With SYS or FORMAT /S you can transfer the system files to the stick
 
To let your computer boot from the USB stick:

               Under construction…


If booting of a stick does not work:
               You can always use the stick together with a bootable CD-ROM or floppy

If the USB stick is not usable after boot with CD-ROM or floppy,  then this is a solution:

               You have the add a config.sys and 2 or 3 files to your CD-ROM or floppy

   You need a config.sys:

   [menu]

   menuitem=USB,USB Boot

   menuitem=Normal,No USB

   menudefault=USB,3

   [USB]

   rem DOS=HIGH               }Sometimes needed with the DOS of Windows 98se

   rem device=HIMEM.SYS } if there is not enough memory left.

                                            }With the DOS of WinME and WinXP  NOT needed !!

   device=USBASPI.SYS /v

   device=DI1000DD.SYS

   lastdrive=Z

   [Normal]

   [COMMON]

   You need these files:

   USBASPI.SYS and DI1000DD.SYS

   With the DOS of Windows98SE you need (if there is to less memory) himem.sys

                  Files Downloads


      System Analyser Files

               The files you need on the bootable device:

               The shareware version:

                  SA53S.COM

                  SA53S.XXX

                  SA53S.LIC

                  SA53S.PIF                        If you want to use it in windows

                  SA53S.DO0                      If you want to use the Help 2

   The Registered version:

                  SA53.COM

                  SA53.XXX

                  SA53.LIC

                  SA53.PCI

                  SA53.PMP

                  SA53.PNP

                  SA53.SMB

                  SA53.VID

                  SA53.PIF                          If you want to use it in windows

                  SA53.DO0                        If you want to use the Help 2

                  SA53.INI                           If you want to suppress result groups from the result file

                  SAREP.COM                    If you want to suppress lines of the result file

                  SAREP.INI                        Settings for the SAREP.COM

                  SAXML.COM                  If you want to translates the result file to the XML format

 進入留言討論區

counter
Table of contents